Products

DESCRIPTION

Basic Info.

Model NO.

RC-2003

Product Description

The price is to be adjusted by negotiation for large orders.
INTRODUCTION
The product uses three kinds of solution, namely A, B and C, which are internationally used. A and B are used as make-up, additives of both A and C are replenished based on the nickel ion concentration, simple operation.

1. Especially for electroless nickel plating on aluminum and its alloy.
2. Less contamination to the following acid electroless nickel process or other electrolytic plating.
3. Excellent adhesion.
4. Excellent process for complicated workpieces.
5. Also be used for electroplating of other substrates.
6. Low operating temperature.

EQUIPMENT
Tank: PP, PVC or PE with high density.
Rack: PP, PVC or 316 stainless steel. Keep the workpiece vertical in the bath, and the distance between two adjacent parts is at least 10mm.
Air agitation: properly and homogeneously air agitation in both main tank and auxiliary tank.
Circulation: 3-4 times every hour.
Addition system: PP, PVC or PE used for charge pump.
Filtration: continuous, filtered with a 10 micron filter cotton or filter bag.
Ventilation: required
Heat system: required
ANALYSIS AND REPLENISHMENT
The Ni2+ standard concentration of working solution is 6.0 g/l, analytical method of Ni2+ concentration:

1. Pipette 5 ml bath into a 250 ml Erlenmeyer flask.
2. Add 50 ml DI water.
3. Add 10 ml ammonium hydroxide (28%) then shake.
4. Add 0.2 g ammonium violet indicator then shake.
5. Titrate with 0.05M EDTA standard solution from light brown to light purple end point, the calculation is based on the amount of EDTA.

Additions of A (ml) = Additions of C (ml) = (6 - EDTA dosage x 0.59) x 13 x volume (L)

OPERATING GUIDELINES

1. Tank should be immersed in nitric acid (1:1) and rinsed with water before use.
2. The bath temperature should be maintained at 29-35ºC, too low of temperature will result in a slow deposit rate, and too high temperature will cause a breakdown of bath.
3. Adjust the pH value with ammonium hydroxide and sulfuric acid (20%) and keep it between 9.0 and 9.5 to ensure the speed of plating. Low pH value causes slow plating speed, and high pH value causes the breakdown of bath, thus the pH value should be determined with pH meter.
4. Avoid the inclusion of heavy metal impurities and surfactant.

SAFETY AND ENVIRONMENTAL
A Material Safety Data Sheet (MSDS) includes product safety instructions and environmental protection instructions. Read and review the MSDS for appropriate health and safety warning before use.
WARRANTY

1. We provide guarantee for product quality under the valid law.
2. The quality of the product after reprocessing or repackaging by customer is not included in the guarantee.
3. Please feel free to contact us if you have any questions or issues about the products, we are ready to answer at any time.

COLOR & PACKAGING
RC-2003A is an alkaline colorless liquid with plastic drum packaging. The packaging specification is 25 kg/pcs.
RC-2003B is an alkaline blue liquid with plastic drum packaging. The packaging specification is 25 kg/pcs.
RC-2003C is an alkaline blue liquid with plastic drum packaging. The packaging specification is 25 kg/pcs.
IMPORTANT NOTICE REGARDING THIS INSTRUCTION BOOK
The product information and recommendations contained in this document are based on our experimental theory and data. Due to the particularity of the surface processing, further as the actual use of our products by others is beyond our control, NO GUARANTEE of any kind is made as to the effects of such use, and NO RESPONSIBLE for any consequences. Also, all the information in this document cannot be used as evidence of copyright infringement.
COMPANY PROFILE
Foshan Nanbowang Environmental Protection Technology Co., Ltd is a subsidiary of Foshan Renchang Technology Co., Ltd., with more than 10 years experience of environmental metal finishing, R & D and sales, and has won a national high-tech enterprise. Our company is mainly engaged in the research and development of environmentally friendly electroplating additives and is committed to the development of cyanide-free, phosphorus-free and ammonia-free metal finishing technologies.The mission of is 'Innovation, Environmental, and Development'. The company's technical team has participated in a number of high-tech research and development, and has independently developed and obtained 3 nationally authorized invention patents and 3 copyrights.

At No.1, we offer high-caliber electroplating additives to improve the appearance and performance characteristics of your components, and have continually refined and evolved our electroplating additives to meet 21st century quality standards. We are agile, efficient, and committed to providing 100% customer satisfaction.